Features

Four adjustment pots

provide versatility for all

kinds of applications.

Model 460-14

Universal range from

190-480VAC, 50 or 60Hz

Model 460-15

provides the versatility

needed to handle global

applications.

Three-Phase

Voltage Monitor

Diagnostic LEDs indicate

trip status and provide

·

simple troubleshooting.

Engineered

Protection

Microcontroller-based

circuitry provides better

·

accuracy and higher

Microcontroller

reliability than analog

Based

designs.

Transient protection meets

Protects 3-Phase

IEEE and IEC standards

and permits operation

Motors from:

under tough conditions.

· Loss of any phase

Single-phase conditions

· Low voltage

are detected regardless of

regenerated voltages.

· High voltage

Units have one NO and

· Voltage unbalance

one NC (-14) or two NO

· Phase reversal

(-15) output contacts.

· Rapid cycling

The Models 460-14 and 460-15 are designed to protect 3-phase loads from

Standard Features:

damaging power conditions. Its wide operating range, combined with UL, cUL

· Isolated output contacts:

and CE compliance, enables quick access to domestic and global markets.

1 NO and 1 NC (460-14)

A unique microcontroller-based voltage and phase-sensing circuit constantly

2 NO (460-15)

monitors the 3-phase voltages to detect harmful power line conditions. When a

· 1-500 sec. variable

harmful  condition  is  detected,  the  MotorSaver's  output  relay  is

restart delay

deactivated after a specified trip delay. The output relay reactivates after power

line conditions return to an acceptable level for a specified amount of time

· 2-8% variable

(restart delay). The trip and restart delays prevent nuisance tripping due to

voltage unbalance

rapidly fluctuating power line conditions.

· 1-30 sec. variable

trip delay

The Models 460-14 and 460-15 automatically sense whether they are connected

to a 190-240V 60Hz system, a 440-480V 60Hz system, or a 380-416V 50Hz

· 8 amp general

system. An adjustment is provided to set the nominal line voltage from

purpose contacts

190-240 or 380-480VAC. Motor control is accomplished with one NO contactor

· Optional manual reset

and one NC contactor (Model 460-14) or two NO contactors (Model 460-15).

· Compact design

Other adjustments include a 1-30 second trip delay, a 1-500 second restart

delay, and a 2-8% voltage unbalance trip point adjustment.

· UL and cUL listed

· CE compliant

· Finger-safe terminals

· 5-year warranty

· Made in USA

· Surface or DIN

rail mountable

2880 North Plaza Drive · Rapid City, SD 57702

(800) 843-8848 · (605) 348-5580 · FAX (605) 348-5685

www.symcominc.com · email: sales@symcominc.com

2/05